ProMAX Front Splitter - £199.95

TNT Next day delivery - £11.95

The ProMAX integrated under tray and front splitter is designed to fit directly to the Porsche 944 S2 and Turbo models manufactured between 1985 and 1991. This item is manufactured from Fibreglass or Carbon Fibre (£369.95) and is based on the 968RS front air splitter. Extensive testing and development prior to use on Porsche Cup racing cars during the 2000 season resulted in 100% successful use during the prestigious one make championship. This contributed to the excellent competitive level achieved by all competing 944 Turbos during the 2000 championship. The ProMAX Front Splitter provides effective and noticeable down force that improves front end grip and reduces under steer. It will improve lap times at track days; increase front end grip on all surfaces and is a simple and direct bolt on replacement for the original plastic under tray.

Removal of original undertray:

Raise the front of the car using ramps or axle stands. For easier access, remove the front road wheels. Remove the perimeter cross head fasteners; end nuts and rear brush guard cross head screws. Remove the under tray.

Fitting new integrated undertray and front splitter:

Offer up new combination under tray and front splitter. Secure with middle cross head fastener. Add remaining perimeter fasteners until all front screws are fitted (do not tighten at this stage). Locate 2 small nuts and bolts that will fit in place of the previous lugs (attached to the original under tray). Feed bolts through holes and fit washers to spread load of bolt head and nut. Fit the three rear brush guard screws. Tighten all screws. Re fit road wheels and lower car. Check that splitter is securely fitted. Fitting complete!

Other Info

Delivery Time: Availability within 72 hours. Delivery extra - just £11.95 to any UK Mainland address. Please check first before ordering if delivery is required outside the UK.

TNT Next day delivery - £11.95

£199.95